I just wrapped up summer quarter at SCAD and I’m doing some catch-up on my blog posts. I’m not posting everything because there are some things I’m saving for special projects that I don’t want to share just yet. But I’ll share a few…here’s the maquette I did for the character design assignment. This is my first time working with Super Sculpey. It isn’t perfectly smooth, but still, it took a long, LONG time to get it to this point. I’m not sure I have the patience to be a sculptor! The design is the fun part for me…the smoothing and perfecting…mmm…not so much. Still, this is a handy skill to have. I’m looking forward to making one for fun, for me, instead of for a grade.
Update: I wanted to add a few notes about how I baked this maquette, as it baked well without cracking. If you scour the internet on information for baking Super Sculpey, you will find scores of conflicting ideas. I will admit that since this is the first time I’ve done it, it doesn’t guarantee that this is the best method, but I thought I’d pass on the information if anyone else wants to try this system.
The first thing I did was estimate the thickest area of the polymer clay at any one point. This figure is 8 inches tall, and the inside is well padded with foil around the armature. I estimate at its thickest it could be no more than 1/2 inch. I also assumed that cracking while baking is most likely related to rapid temperature fluctuations (that’s why sidewalks crack, right?). So I put it in the cold oven and decided to use a “ladder” system of temperature changes to try to minimize any cracking. Here are the times and temperatures I used (note that 170 was the lowest setting for my oven): 170 degrees for 20 minutes + 200 degrees for 20 minutes + 225 degrees for 20 minutes + 200 degrees for 20 minutes + 170 degrees for 20 minutes = 1 hour, 40 minutes total baking time. I then let it cool down with the oven door closed for about 4 hours. The color changed to a slightly darker flesh tone from the unbaked color, and it has the look and feel of plastic when baked. I’ll probably try the same method when I do this again, and I’ll be sure to report on the results. One last thing: the oven definitely had an odd chemical odor after I finished, so I gave it a thorough scrub with a foaming oven cleaner before I cooked anything in it. I’d suggest having a can of oven cleaner on hand if you plan to cook anything afterwards, as you don’t want to use the self-cleaning cycle for this cleanup. Happy baking!
![[del.icio.us]](http://rocarts.com/sabrecat/wp-content/plugins/bookmarkify/delicious.png)
![[Digg]](http://rocarts.com/sabrecat/wp-content/plugins/bookmarkify/digg.png)
![[StumbleUpon]](http://rocarts.com/sabrecat/wp-content/plugins/bookmarkify/stumbleupon.png)
![[Technorati]](http://rocarts.com/sabrecat/wp-content/plugins/bookmarkify/technorati.png)
Dang, that’s nice!
Oh wow!!!! The sculpy looks amazing!
Cute! I love it. He’s an adorable character!